KRYPTON II XPS-350 WHITE for manicure and pedicure 70 W 35000

KRYPTON II XPS-350 (Krypton) manicure and pedicure drill 35000 RPM white – a professional device in a new white design. The 70 W power is sufficient to confidently remove coatings, correct architecture, and work with pedicure attachments. The micromotor handle rotates smoothly with minimal vibration.

Specifications and Features of the Krypton 2 XPS-350 White Drill

Features

• EASY CONTROL – the processor automatically switches the direction Forward/Reverse after pressing the button, without stopping the device
• FREE FOOT – pause pedal: the first press starts the operation, the second puts it on pause, the next returns to the set RPM
• PROTECTION+ – sound signal, error code, auto-stop if the drill is installed incorrectly, the handle lock is not tightly closed, or the motor is overloaded
• LED display shows the current speed and operating mode
• control buttons are positioned at the front
• the collet is located at the center of the micromotor body, preventing accidental opening
• body holes keep the necessary drills at hand
• the holder is installed at an angle: the drill does not hit the table
• the micromotor handle cooling is designed for prolonged use without overheating
• light dust from materials is almost invisible on the white body

Specifications

1. power 70 W
2. rotation speed 0–35,000 RPM
3. torque 3 N·cm
4. smooth speed adjustment
5. electronic reverse
6. plastic micromotor handle
7. white color of the body, handle, cables
8. power supply 220–230 V, 50 Hz
9. warranty 24 months
10. certified in Ukraine, EU countries
11. manufacturer South Korea
12. handle weight 265 g
13. block size 12x14.7x8.8 cm
14. weight 1365 g

Who It Is Suitable For

• manicurists and pedicurists from salons or private offices
• masters who remove gel, acrylic gel, perform strengthening, architectural correction
• those who choose equipment for a light minimalist interior

How to Use the KRYPTON II XPS-350 Manicure Drill 35000 RPM

1. Connect the micromotor handle and the pedal. Plug the device into a 220–230 V outlet.
2. Insert the drill until it stops, securely close the lock. Do not close the handle without the attachment, do not start the device.
3. Set the desired speed using the regulator, checking the display. A lower speed is more comfortable for the client and extends the tool's lifespan.
4. Start the rotation with the FREE FOOT pedal. You do not need to keep your foot on it constantly: a repeated press puts it on pause.
5. Change the rotation direction with the EASY CONTROL button. Do not overload the motor with heavy attachments, follow the manufacturer's recommendations for tools.
6. Periodically check the temperature of the block with your hand. If it is hot, stop working until it cools down completely. Do not cool it forcibly with a hairdryer, ice, or air conditioning – this may damage the board. Purchasing the professional KRYPTON II XPS-350 manicure and pedicure drill is recommended for masters who frequently work with pedicure attachments at high speeds: PROTECTION+ will timely stop the motor in case of overload.
7. After the procedure, remove the drill, turn off the device, and clean the body from dust.

Package Contents

• power supply
• micromotor handle + holder
• foot control pedal
• user manual
• warranty card
• warning sheet

Storage Conditions: store in a dry place, away from water, direct sunlight, and heating devices